COMBINED AND THREE-ROD MODELS OF THE WORKING BODIES OF THE CHAIN UNIT CHAMBER AND THEIR RESEARCH

Authors

  • Vladimir Alexandrovich Potapov Baranovichi State University https://orcid.org/0000-0001-7112-8165
  • Sergei Ivanovich Rusan Baranovichi State University
  • Leonid Alexandrovich Sivachenko Baranovichi State University

DOI:

https://doi.org/10.36773/1818-1112-2023-131-2-85-92

Keywords:

chain unit, working chamber, сombined model, three-rod model, kinematics, dynamic analysis

Abstract

The article presents two models of the working bodies of the chamber of the chain assembly - combined and three-rod, which allows you to approximately determine their kinematic characteristics and the forces of interaction with the rocker. In the combined model, flexible walls are represented by rigid rods, and chain webs are weightless threads. The three-rod model is presented in the form of three rigid rods. For both models, all connections between the parts of the working bodies, the rocker arm and the body frame are accepted as articulated. The mass of canvases and material is distributed between three points, combined with kinematic pairs (hinges). The results of the study can be used to determine the load on the engine of the drive mechanism of the unit and calculate the strength.

Author Biographies

Vladimir Alexandrovich Potapov, Baranovichi State University

Senior Lecturer of the Department of Technical Support of Agricultural Production and Agronomy, Baranovichi State University, Baranovichi, Republic of Belarus.

Sergei Ivanovich Rusan, Baranovichi State University

Ph.D in Engineering, Associate Professor, Baranovichi State University, Baranovichi, Republic of Belarus.

Leonid Alexandrovich Sivachenko, Baranovichi State University

Doctor of Technical Sciences, Professor, Professor of the Department of Transport and Technological Machines, Belarusian-Russian University, Mogilev, Republic of Belarus.

Downloads

Published

2023-11-02

How to Cite

(1)
Potapov, V. A.; Rusan, S. I.; Sivachenko, L. A. COMBINED AND THREE-ROD MODELS OF THE WORKING BODIES OF THE CHAIN UNIT CHAMBER AND THEIR RESEARCH. Вестник БрГТУ 2023, 85-92.

Issue

No. 2(131) (2023): Vestnik of Brest State Technical University

Section

Mechanical Engineering

License

Copyright (c) 2023 Brest State Technical University

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

The work is provided under the terms of Creative Commons public license Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows an unlimited number of persons to reproduce and share the Licensed Material in all media and formats. Any use of the Licensed Material shall contain an identification of its Creator(s) and must be for non-commercial purposes only. Users may not prevent other individuals from taking any actions allowed by the license.