THE RESULTS OF ACCEPTANCE TESTS OF THE WIDELY FUNCTIONAL AMPSH-6 TILLAGE AND SOWING UNIT

Authors

  • Sergey Vasilevich Savchuk Brest State Technical University
  • Yuri Nikolaevich Salivonchik Brest State Technical University
  • Victor Alexandrovich Sokol Brest State Technical University
  • Nikolai Stepanovich Yalkovsky Brest State Technical University
  • Nikolay Danilovich Lepeshkin Scientific and Practical Center for Agriculture Mechanization of the National Academy of Sciences of Belarus

DOI:

https://doi.org/10.36773/1818-1112-2024-134-2-89-92

Keywords:

unit, acceptance tests, seeding

Abstract

The article considers the results of acceptance tests of the widely functional AMPSH-6 tillage and sowing unit to assess compliance with the characteristics defined in the terms of reference, as well as verification and confirmation of compliance of the prototype with the requirements of the Technical Specifications.

Author Biographies

Sergey Vasilevich Savchuk, Brest State Technical University

Candidate of Technical Sciences, Associate Professor, Department of Mechanical Engineering and Vehicle Operation, Brest State Technical University, Brest, Republic of Belarus.

Yuri Nikolaevich Salivonchik, Brest State Technical University

Senior Lecturer, Department of Mechanical Engineering and Vehicle Operation, Brest State Technical University, Brest, Republic of Belarus.

Victor Alexandrovich Sokol, Brest State Technical University

Master of Technical Sciences, Senior Lecturer of the Department of Mechanical Engineering and Vehicle Operation, Brest State Technical University, Brest, Republic of Belarus.

Nikolai Stepanovich Yalkovsky, Brest State Technical University

Senior Lecturer, Department of Mechanical Engineering and Vehicle Operation, Brest State Technical University, Brest, Republic of Belarus.

Nikolay Danilovich Lepeshkin, Scientific and Practical Center for Agriculture Mechanization of the National Academy of Sciences of Belarus

Candidate of Technical Sciences, Associate Professor, Leading Researcher of the Laboratory of Soil Cultivation and Sowing of the RUE "Scientific and Practical Center for Agriculture Mechanization of the National Academy of Sciences of Belarus", Minsk, Republic of Belarus.

References

Порядок постановки продукции на производство : ТКП 424-2012 (02260) // УП «ПРОМСТАНДАРТ». – Минск, 2012. – 24 с.

Руководство по эксплуатации агрегата почвообрабатывающе-посевного широкофункционального АМПШ-6 : утв. ОАО «Брестский электромеханический завод» 14.01.2019 г.: текст по состоянию на 01 февраля 2024 г. / В. Н . Жиян, С. В. Олесик, И. В. Синюкович. – Брест, 2019. – С. 10–17.

Протокол № 062 Д 1/3 - 2020 от 21 декабря 2020 приёмочных испытаний совмещенных с сертификационными агрегата почвообрабатывающе-посевного широкофункционального АМПШ-6ДСУ33 «Берестье» / ГУ «Белорусская МИС». – Минск, 2020. – 54 с.

Downloads

Published

2024-07-19

How to Cite

(1)
Savchuk, S. V.; Salivonchik, Y. N.; Sokol, V. A.; Yalkovsky, N. S.; Lepeshkin, N. D. THE RESULTS OF ACCEPTANCE TESTS OF THE WIDELY FUNCTIONAL AMPSH-6 TILLAGE AND SOWING UNIT. Вестник БрГТУ 2024, 89-92.

Issue

No. 2(134) (2024): Vestnik of Brest State Technical University

Section

Mechanical Engineering

License

Copyright (c) 2024 Brest State Technical University

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Most read articles by the same author(s)